Paper
26 October 1989 Welding Of Steel With A CO2-Laser Of 20 Kw
M. Funk, U. Kohler, K. Behler, E. Beyer
Author Affiliations +
Proceedings Volume 1132, High Power Lasers and Laser Machining Technology; (1989) https://doi.org/10.1117/12.961578
Event: 1989 International Congress on Optical Science and Engineering, 1989, Paris, France
Abstract
Laser welding experiments of thick metal sheets with a thickness of up to 20 mm at high power levels up to 20 kW beam power are reported. Due to the high intensity of the laser beam exceeding 107 Wcm-2, the effect of plasma suppression by helium gas shielding was investigated. Furthermore, the welding parameters were determined for a laser beam power range between 10 and 20 kW. The first results indicate that an extrapolation of the laser welding parameters which already had been observed when welding at lower power levels < 10 kW, is not applicable for the 20 kW range. Moreover, the influence of the welding speed on the porosity of the welding seam in low carbon steels of 20 mm sample thickness was slightly different from results of thin sheet welding with a thickness of less than 10 mm.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Funk, U. Kohler, K. Behler, and E. Beyer "Welding Of Steel With A CO2-Laser Of 20 Kw", Proc. SPIE 1132, High Power Lasers and Laser Machining Technology, (26 October 1989); https://doi.org/10.1117/12.961578
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Plasma

Laser welding

Laser applications

Carbon

Helium

High power lasers

Metals

RELATED CONTENT

Laser remanufacturing technology and its applications
Proceedings of SPIE (January 04 2008)
Effect of adding a magnetic field on the penetration of...
Proceedings of SPIE (September 30 1996)
High-power lasers for industrial and ecological use
Proceedings of SPIE (December 22 1998)
High Power Lasers And Laser Metalworking
Proceedings of SPIE (July 25 1979)
Prospects of very high-power CO2 laser in welding
Proceedings of SPIE (September 23 1996)

Back to Top