Paper
21 February 2020 Compact high-power GHz intra-burst repetition rate all-in-fiber CPA system with LMA fiber power amplifier
Author Affiliations +
Abstract
A compact high-power femtosecond (~640 fs) GHz intra-burst repetition rate all-in-fiber CPA system operating at 3.26 GHz intra-burst and 200 kHz burst repetition rate regime with two configurations of large mode area (LMA and PCF) cladding-pumped Yb-doped fiber power amplifiers were presented in this work. Significantly high average power levels of 6 W (LMA fiber power amplifier) and <20 W (PCF power amplifier) were achieved which corresponded to a maximum energy of 30 μJ and <100 μJ per burst respectively. Two burst shaping layouts were introduced in this experimental setup obtaining desired burst shape using one or two acousto-optic modulators, pulse repetition rate multiplier based on a cascaded 2×2 fiber coupler sequence with a splitting ratio of 50/50 and controlled using arbitrary waveform generator. High power all-in-fiber CPA system with LMA fiber power amplifier operating at GHz burst regime was compared to the system operating at MHz pulse repetition rate regime which allowed to achieve 1.5 μJ energy pulses of good pulse quality at the output of the laser system at a repetition rate of 4 MHz.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tadas Bartulevičius, Karolis Madeikis, Laurynas Veselis, and Andrejus Michailovas "Compact high-power GHz intra-burst repetition rate all-in-fiber CPA system with LMA fiber power amplifier", Proc. SPIE 11260, Fiber Lasers XVII: Technology and Systems, 112602F (21 February 2020); https://doi.org/10.1117/12.2545665
Lens.org Logo
CITATIONS
Cited by 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Amplifiers

Fiber amplifiers

Fiber couplers

High power fiber amplifiers

Femtosecond phenomena

Fiber lasers

Laser systems engineering

Back to Top