Paper
31 July 2019 Multi-parameter geometric measurement of piston based on laser projection
Liu Sen, Cheng Wei, Qingzeng Ma, Xinqiang Ma, Hailong Ge
Author Affiliations +
Proceedings Volume 11198, Fourth International Workshop on Pattern Recognition; 111980X (2019) https://doi.org/10.1117/12.2540374
Event: Fourth International Workshop on Pattern Recognition, 2019, Nanjing, China
Abstract
Aiming at the problem of low accuracy and poor safety of traditional piston contact detection, a multi-parameter geometric measurement system of piston based on laser projection is proposed in this paper. Based on the principle of parallel light column projection imaging, a mechanical structure, such as motion control based on board card, was designed to realize multi-parameter non-contact detection of piston ring groove width, ring groove depth and ring groove inclination. Through the experimental study, the size tolerance of piston ring groove is about 0.02 mm, and the angle tolerance is about 0.2 degree, also the error analysis of the whole measuring system is carried out. The results show that it is feasible to detect the multi-parameter geometry of piston ring groove by laser projection principle, and it can simplify the step of piston detection, ensure the detection accuracy and improve the efficiency.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Liu Sen, Cheng Wei, Qingzeng Ma, Xinqiang Ma, and Hailong Ge "Multi-parameter geometric measurement of piston based on laser projection", Proc. SPIE 11198, Fourth International Workshop on Pattern Recognition, 111980X (31 July 2019); https://doi.org/10.1117/12.2540374
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Data acquisition

Projection systems

Sensors

Error analysis

Tolerancing

Combustion

Laser applications

Back to Top