Paper
18 November 2019 Tunable polarization-independent broadband absorber in the terahertz regime
Author Affiliations +
Abstract
Here we report a tunable polarization-independent broadband absorber in the terahertz regime. The proposed structure consists of periodic all-dielectric array on a gold substrate, sandwiched by a monolayer graphene and an epsilon-near-zero layer. Simulation results show that the absorption that is independent from the incident polarization remains above 90% over a broadband spectral range from 1.6 THz to 4.1 THz, corresponding to a bandwidth of 2.5 THz and a relative bandwidth of 87.7%. By varying the graphenes Fermi energy from 0.2 eV to 0.5 eV, the absorption bandwidth can be turned from 1.5 THz to 2.5 THz. We expect this polarization- independent absorber with dynamically tunable bandwidth can be used a filters in applications such as terahertz detectors.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xingzhe Shi, Yuanfu Lu, Changshui Chen, Songhao Liu, and Guangyuan Li "Tunable polarization-independent broadband absorber in the terahertz regime", Proc. SPIE 11196, Infrared, Millimeter-Wave, and Terahertz Technologies VI, 111960G (18 November 2019); https://doi.org/10.1117/12.2537677
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Terahertz radiation

Gold

Graphene

Resonance enhancement

Fabry–Perot interferometers

Light-matter interactions

Back to Top