Low-light-level SWIR photodetectors based on the InGaAs material system

F. Rutz; R. Aidam; A. Bächle; J. Niemasz; A. Zibold; M. Schepperle; R. Rehm

doi:10.1117/12.2533015

9 October 2019 Low-light-level SWIR photodetectors based on the InGaAs material system

F. Rutz, R. Aidam, A. Bächle, J. Niemasz, A. Zibold, M. Schepperle, R. Rehm

Proceedings Volume 11159, Electro-Optical and Infrared Systems: Technology and Applications XVI; 1115906 (2019) https://doi.org/10.1117/12.2533015
Event: SPIE Security + Defence, 2019, Strasbourg, France

Abstract

The short-wavelength infrared (SWIR) regime between 1 and 3 μm is of high interest especially for surveillance, reconnaissance, and remote sensing applications. The availability of high-power, yet eye-safe SWIR laser sources is an important asset enabling scene illumination and implementation of advanced active imaging concepts like gated viewing (GV) or light detection and ranging (LIDAR). With atmospheric nightglow also a natural, but faint source for scene illumination is available for passive low-light-level imaging in the SWIR region. The most commonly employed material system for realizing SWIR photodetectors is InGaAs with an indium content of 53%. The spectral sensitivity of In_0.53Ga_0.47As with its cut-off wavelength of 1.7 μm covers a wide part of the nightglow spectrum as well the emission lines of available laser sources at typical telecom wavelengths around 1.55 μm. However, for low-light-level passive SWIR imaging a dark-current density around 10^-9 A/cm² is considered mandatory. While the international state-of-the-art has already achieved this performance at room-temperature operation, today’s European stateof- the-art is still lagging behind. The development of InGaAs-based SWIR detectors at Fraunhofer IAF aims at pin as well as avalanche photodiodes (APDs) for imaging applications with 640×512 pixels. While InGaAs APDs play to their strength in GV applications with typically rather short integration times, planar processed InGaAs/InP pin photodiodes with lowest possible dark-current and noise characteristics are the detector devices of choice for passive low-light-level detection. Within a few planar-process batches, we approached the European state-of-the-art for the dark-current density of 15-μm-pitch InGaAs pin detectors by a remaining factor of five. The most recent process run yielded further slightly improved dark-current characteristics on test devices. Recently, we have started with in-house characterization of such focal plane detector arrays hybridized with suitable SWIR read-out integrated circuits.

Citation Download Citation

F. Rutz, R. Aidam, A. Bächle, J. Niemasz, A. Zibold, M. Schepperle, and R. Rehm "Low-light-level SWIR photodetectors based on the InGaAs material system", Proc. SPIE 11159, Electro-Optical and Infrared Systems: Technology and Applications XVI, 1115906 (9 October 2019); https://doi.org/10.1117/12.2533015

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available