Paper
10 October 2019 EUV reticle defectivity protection options
Author Affiliations +
Abstract
EUV pellicles have been enabled to provide customers with defect protection for EUV reticles. However, due to the absorption that is much higher than for DUV pellicles, using the pellicle has certain disadvantages. Most significant is the reduction in throughput caused by the absorption of EUV photons in the pellicle. This leads to a customer decision to use a pellicle and accept the reduced throughput, or to not use a pellicle and have additional inspection steps to check the cleanliness of the EUV reticle. These tradeoffs vary by customer and use case. This study addresses the balance of factors for using or not using a pellicle through a cost comparison.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael Lercel, Christophe Smeets, Mark van de Kerkhof, Amo Chen, Tjarko van Empel, and Vadim Banine "EUV reticle defectivity protection options", Proc. SPIE 11148, Photomask Technology 2019, 111480Y (10 October 2019); https://doi.org/10.1117/12.2535396
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Pellicles

Extreme ultraviolet

Scanners

Inspection

Reticles

Extreme ultraviolet lithography

Deep ultraviolet

RELATED CONTENT

Status of the AIMS EUV development project
Proceedings of SPIE (October 01 2013)
EUV progress toward HVM readiness
Proceedings of SPIE (March 18 2016)
NXE pellicle: development update
Proceedings of SPIE (September 26 2016)
First light and results on EBL2
Proceedings of SPIE (July 13 2017)
EUV phase shift mask requirements for imaging at low-k1
Proceedings of SPIE (January 01 1900)

Back to Top