Paper
23 October 2018 Quantum dots optical fiber temperature sensor based on the printing method
Author Affiliations +
Abstract
A printing method of quantum dots (QDs) optical fiber is presented in this paper. The printing ink with suitable viscosity is composed of the UV adhesive and the CdSe/ZnS quantum dot. By adjusting the pressure and waveform parameters of inkjet printer, a stable droplet is formed. A segment of QDs optical fiber is printed on the organic polymer material substrate subjected to viscous treatment by controlling the spacing between adjacent droplets. When the printed QDs optical fiber is aligned to multi-mode optical fiber which is used to transmit the excitation light, strong fluorescence of the QDs fiber is detected by the optical spectrum analyzer (OSA). Using the printed QDs optical fiber as the senor, the temperature measurement is realized. The sensitivity of the luminescent peak with the temperature is about 115.0pm/°C.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guosheng Zhang, Zixiang Zhuang, Yulin Wu, Yixin Zha, Jian Wang, Zhigang Cao, and Benli Yu "Quantum dots optical fiber temperature sensor based on the printing method", Proc. SPIE 10821, Advanced Sensor Systems and Applications VIII, 108211B (23 October 2018); https://doi.org/10.1117/12.2500611
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Printing

Luminescence

Inkjet technology

Quantum dots

Multimode fibers

Temperature sensors

Back to Top