Paper
6 July 1989 Novel Printing------Using Polymeric Gel as Ink
Noboru Toyama, Hiroshi Fukumoto, Hiroshi Tanioka, Kozo Arahara, Norihiko Koizumil, Toshiya Yuasa, Motokazu Kobayashi, Fumitaka Kan
Author Affiliations +
Proceedings Volume 1079, Hard Copy Output; (1989) https://doi.org/10.1117/12.952811
Event: OE/LASE '89, 1989, Los Angeles, CA, United States
Abstract
Novel printing ink has been developed based on polymeric gel having the nature of gel to sol transition caused by application of electric voltage. The polymeric gel ink consisted of polyvinyl alcohol) (PVA) partially crosslinked with borax, carbon black as a pigment, and water. Printing facilities was also designed. Polymeric gel ink with electric conductivity 4.0 x 10-3 Ω-1cm-1 was used. It could offer resolution of more than 200 dots per inch (dpi). Image density was fully controlled from 0.05 to 1.5 as optical density by application of electric voltage of 3 - 12 V. An advantage of this printing system was that polymeric gel ink not only acted as ink but also as the support.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Noboru Toyama, Hiroshi Fukumoto, Hiroshi Tanioka, Kozo Arahara, Norihiko Koizumil, Toshiya Yuasa, Motokazu Kobayashi, and Fumitaka Kan "Novel Printing------Using Polymeric Gel as Ink", Proc. SPIE 1079, Hard Copy Output, (6 July 1989); https://doi.org/10.1117/12.952811
Lens.org Logo
CITATIONS
Cited by 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymers

Printing

Electrodes

Metals

Head

Carbon

Rectangular pulse

Back to Top