Paper
24 May 2018 The multichannel pyrometer of the spectral ratio for on-line monitoring in the powder bed additive technologies
Author Affiliations +
Abstract
Optical diagnostic methods were used to study the physical processes occurring on the surface of the melt in the technology of selective laser melting (SLM) of metallic powders. Independent registration of the fraction of reflected laser radiation and thermal radiation from several points of the surface of the melt were carried out simultaneously. This made it possible to distinguish changes in the surface relief and subsurface processes of heat and mass transfer during laser heating. It is shown that the frequency and amplitude characteristics of signals obtained by optical diagnostics make it possible to identify the moments of intensification of convective heat and mass transfer. The results of the research can be used to develop methods and tools for on-line monitoring and control of the SLM process.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Y. N. Zavalov, A. V. Dubrov, P. S. Rodin, F. Kh. Mirzade, V. N. Glebov, A. M. Malutin, and G. A. Dubrov "The multichannel pyrometer of the spectral ratio for on-line monitoring in the powder bed additive technologies", Proc. SPIE 10677, Unconventional Optical Imaging, 106772G (24 May 2018); https://doi.org/10.1117/12.2307578
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical diagnostics

Photodiodes

Oxidation

Reflection

Spatial light modulators

Pyrometry

Laser applications

Back to Top