Technical note: design and validation of an open-source library of dynamic reference frames for research and education in optical tracking

A. Brown; A. Uneri; T. De Silva; A. Manbachi; J. H. Siewerdsen

doi:10.1117/12.2322412

13 March 2018 Technical note: design and validation of an open-source library of dynamic reference frames for research and education in optical tracking

A. Brown, A. Uneri, T. De Silva, A. Manbachi, J. H. Siewerdsen

Author Affiliations +

Proceedings Volume 10576, Medical Imaging 2018: Image-Guided Procedures, Robotic Interventions, and Modeling; 105760M (2018) https://doi.org/10.1117/12.2322412
Event: SPIE Medical Imaging, 2018, Houston, Texas, United States

Abstract

Purpose: Dynamic reference frames (DRFs) are a common component of surgical tracking systems, but there is a limited number of commercially available, valid tool designs, presenting a limitation to researchers in image-guided surgery and other communities. This work presents the development and validation of a large, open-source library of DRFs for passive optical tracking systems. Methods: Ten groups of DRF designs were generated according to an algorithm based on intra- and inter-tool design constraints. Validation studies were performed using a Polaris Vicra tracker (NDI) to compare the performance of each DRF in group A to a standard commercially available reference tool, including: tool-tip pivot calibration and measurement of fiducial registration error (FRE) on a computercontrolled bench Results: The resulting library of DRFs includes 10 groups - one with 10 DRFs and nine with 6. Each group includes one tool geometrically equivalent to a common commercially available DRF (NDI #8700339). Fiducial registration error (FRE) was 0.15 ± 0.03 mm, indistinguishable from the reference. Conclusions: The library of custom DRF designs perform equivalently to common, commercially available reference DRFs and present a multitude of distinct, simultaneously-trackable DRF designs. The open-source library contains files suitable to 3D printing as well as tool definition files ready to download for research purposes.

Citation Download Citation

A. Brown, A. Uneri, T. De Silva, A. Manbachi, and J. H. Siewerdsen "Technical note: design and validation of an open-source library of dynamic reference frames for research and education in optical tracking", Proc. SPIE 10576, Medical Imaging 2018: Image-Guided Procedures, Robotic Interventions, and Modeling, 105760M (13 March 2018); https://doi.org/10.1117/12.2322412

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE