SPAD-based flash LiDAR sensor with high ambient light rejection for automotive applications

Maik Beer; Olaf M. Schrey; Jan F. Haase; Jennifer Ruskowski; Werner Brockherde; Bedrich J. Hosticka; Rainer Kokozinski

doi:10.1117/12.2286879

26 January 2018 SPAD-based flash LiDAR sensor with high ambient light rejection for automotive applications

Maik Beer, Olaf M. Schrey, Jan F. Haase, Jennifer Ruskowski, Werner Brockherde, Bedrich J. Hosticka, Rainer Kokozinski

Proceedings Volume 10540, Quantum Sensing and Nano Electronics and Photonics XV; 105402G (2018) https://doi.org/10.1117/12.2286879
Event: SPIE OPTO, 2018, San Francisco, California, United States

Abstract

LiDAR is a key sensor technology for future driving. For autonomous vehicles a fast and reliable three dimensional monitoring of the environment is essential for managing a wide variety of common traffic situations. Since these kinds of systems use typically light in the near infrared range, ambient light of the sun is a serious problem due to its high intensity compared to the laser source. Therefore, reducing the influence of ambient light on the distance measurement is very important. In this paper we present a 2 × 192 pixel SPAD-based direct time-of-flight line sensor for flash LiDAR applications with high ambient light rejection integrated in standard CMOS technology. Two commercially available 905 nm laser diodes emitting short pulses are employed for scene illumination. For time measurement an in-pixel timeto- digital-converter with a resolution of 312.5 ps and full range of 1.28 μs has been implemented. Each pixel uses four vertically arranged single SPADs for background light rejection based on the detection of temporal correlated photons. This technique allows the discrimination of the received laser pulse buried in the superimposed background light and, hence, to improve the measurement quality. Additionally, different parameters of the coincidence detection circuit, such as coincidence depth and time, can be varied during operation to enable a real time adjustment to the present ambient light condition, which is measured between each laser shot by operating the sensor in photon counting mode. By using this technique the sensor allows a reliable distance measurement at various ambient and target conditions.

Conference Presentation

Citation Download Citation

Maik Beer, Olaf M. Schrey, Jan F. Haase, Jennifer Ruskowski, Werner Brockherde, Bedrich J. Hosticka, and Rainer Kokozinski "SPAD-based flash LiDAR sensor with high ambient light rejection for automotive applications", Proc. SPIE 10540, Quantum Sensing and Nano Electronics and Photonics XV, 105402G (26 January 2018); https://doi.org/10.1117/12.2286879

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available