Paper
23 August 2017 A dual tapered Mach-Zehnder interferometer for magnetic field sensing
Author Affiliations +
Abstract
A magnetic field sensor based on a Mach-Zehnder interferometer with standard single mode fiber (SMF-28) is proposed. Here, the MZI was developed by using tapered optical fiber technique. Moreover, the Mach-Zehnder interferometer is manufactured with two tapers, with a core diameter of 25~40 μm and a length of 5 mm, and a separation between the tapers about of 4~6.5 cm. The MZI was covered by a fluid with magnetic proprieties. Performing experiments with magnets, coils and transformers, hoping that the proposed sensor offers a good option to measure the magnetic field in electrical devices.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
E. A. Hernandez-Robles, J. M. Estudillo-Ayala, J. M. Sierra-Hernandez, D. Jauregui-Vazquez, J. C. Hernandez-Garcia, R. Rojas-Laguna, and J. R. Martinez-Angulo "A dual tapered Mach-Zehnder interferometer for magnetic field sensing", Proc. SPIE 10382, Photonic Fiber and Crystal Devices: Advances in Materials and Innovations in Device Applications XI, 103820Y (23 August 2017); https://doi.org/10.1117/12.2273956
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometers

Magnetic sensors

Magnetism

Measurement devices

Photonic crystal fibers

Sensors

Mach-Zehnder interferometers

Back to Top