Paper
23 August 2017 Measurement of vibration using phase only correlation technique
S. Balachandar, K. Vipin
Author Affiliations +
Abstract
A novel method for the measurement of vibration is proposed and demonstrated. The proposed experiment is based on laser triangulation: consists of line laser, object under test and a high speed camera remotely controlled by a software. Experiment involves launching a line-laser probe beam perpendicular to the axis of the vibrating object. The reflected probe beam is recorded by a high speed camera. The dynamic position of the line laser in camera plane is governed by the magnitude and frequency of the vibrating test-object. Using phase correlation technique the maximum distance travelled by the probe beam in CCD plane is measured in terms of pixels using MATLAB. An actual displacement of the object in mm is measured by calibration. Using displacement data with time, other vibration associated quantities such as acceleration, velocity and frequency are evaluated. The preliminary result of the proposed method is reported for acceleration from 1g to 3g, and from frequency 6Hz to 26Hz. The results are closely matching with its theoretical values. The advantage of the proposed method is that it is a non-destructive method and using phase correlation algorithm subpixel displacement in CCD plane can be measured with high accuracy.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Balachandar and K. Vipin "Measurement of vibration using phase only correlation technique", Proc. SPIE 10373, Applied Optical Metrology II, 1037313 (23 August 2017); https://doi.org/10.1117/12.2282429
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser beam diagnostics

Charge-coupled devices

Frequency conversion

High speed cameras

MATLAB

Digital image correlation

Imaging technologies

RELATED CONTENT

Quantum imaging for enhanced microscopy and light modulation
Proceedings of SPIE (September 03 2019)
Target alignment on the LIL laser facility
Proceedings of SPIE (May 16 2007)
Measurement of the laser beam quality using knife-edge method
Proceedings of SPIE (November 20 2009)
Simulations of high-order curvature adaptive optics
Proceedings of SPIE (March 03 2003)

Back to Top