Presentation
25 September 2017 Nano-diamond polishing of super hard materials (Conference Presentation)
Author Affiliations +
Abstract
A new nano-diamond based mechanical polishing process has been developed and optimized for polishing super hard materials such as SiC, sapphire and diamond samples. The nano-diamond based process uses specially engineered nano-diamond particles that has ability to react with super hard materials when used for polishing. Such a reactive nano-diamond process leads to removal rates of about an order higher than the base particles and yields ultra-smooth surfaces (RMS <0.5nm) on the super hard materials along with very low sub-surface damage. The process yielded surface roughness less than 1 nm for silicon carbide, sapphire and diamond materials. The process has been studied for single crystalline, poly-crystalline and composite materials. The removal rates for different materials with the newly developed nano-diamond process compared to base nano-diamond particles and the surface finish obtained with the use of atomic force microscope, optical interferometer and tropel flat master will be presented. The mechanism of nano-diamond process will be explained in the conference.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Rajiv Singh and Arul Chakkaravarthi Arjunan "Nano-diamond polishing of super hard materials (Conference Presentation)", Proc. SPIE 10372, Material Technologies and Applications to Optics, Structures, Components, and Sub-Systems III, 103720C (25 September 2017); https://doi.org/10.1117/12.2275080
Advertisement
Advertisement
KEYWORDS
Polishing

Diamond

Particles

Sapphire

Silicon carbide

Surface finishing

Crystals

RELATED CONTENT


Back to Top