Paper
23 January 2017 System simulation for an untreated sewage source heat pump (USSHP) in winter
Na Qin, Peng Z. Hao
Author Affiliations +
Proceedings Volume 10322, Seventh International Conference on Electronics and Information Engineering; 103220O (2017) https://doi.org/10.1117/12.2265269
Event: Seventh International Conference on Electronics and Information Engineering, 2016, Nanjing, China
Abstract
The paper discusses the system characteristics of an untreated sewage source heat pump in winter. In this system, the sewage enters into the evaporator directly. The variable parameters to control the system contain the sewage temperature at evaporator inlet and the water temperature at condenser inlet. It is found that most parameters, except the condensation heat transfer coefficient, change in the form of sine wave the same as the sewage temperature at inlet. The heating load and consumed power are 12.9kW and 3.45kW when the sewage temperature at inlet is 13°C. COP is about 3.75 in the range of the sewage temperature at inlet of 12-13°C.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Na Qin and Peng Z. Hao "System simulation for an untreated sewage source heat pump (USSHP) in winter", Proc. SPIE 10322, Seventh International Conference on Electronics and Information Engineering, 103220O (23 January 2017); https://doi.org/10.1117/12.2265269
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Control systems

Temperature metrology

Quantum efficiency

Cesium

Electroluminescence

Electronics

Electronics engineering

Back to Top