Paper
24 March 1989 Output Characteristics Of Industrial YAG Lasers Over 1 kWatt Power In CW And Quasi CW Mode
H. Takenaka, K Okino, M Tani, J. Buchholz,
Author Affiliations +
Proceedings Volume 1021, High Power Solid State Lasers; (1989) https://doi.org/10.1117/12.950087
Event: 1988 International Congress on Optical Science and Engineering, 1988, Hamburg, Germany
Abstract
This paper presents data about the output characteristics of kilowatt Nd:YAG laser systems, developed by NEC. Since a big part of the publication regarding YAG lasers deal with SLAB lasers, it seems difficult to explain why results about laser systems using YAG rods, are still interesting. However, the answer is simple: one, laser systems with YAG rods and with more than one kilowatt output power are available today commercially. The second point is, that industry needs high powered systems for material processing. It cannot wait any longer. The technique is ripe, and industry needs more practical experience with high power YAG laser radiation, because results have proven that the key to material processing in the future lies with YAG lasers. Industry must awaken to this fact. Even if rod lasers she higher beam divergency than SLAB lasers, the technology provides a lot of other practical benefits, especially when fiber cables are used for resolving beam handling problems. There are sufficient applications in material processing, fully satisfied by rod lasers: cutting of sheet metal and 3 dimensional parts up to several mm thick, welding and surface hardening.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. Takenaka, K Okino, M Tani, and J. Buchholz, "Output Characteristics Of Industrial YAG Lasers Over 1 kWatt Power In CW And Quasi CW Mode", Proc. SPIE 1021, High Power Solid State Lasers, (24 March 1989); https://doi.org/10.1117/12.950087
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
YAG lasers

Laser cutting

Continuous wave operation

High power lasers

Lamps

Resonators

Fiber lasers

RELATED CONTENT

Welding with suprakilowatt solid state lasers
Proceedings of SPIE (August 01 1990)
Welding with high-power CW Nd:YAG
Proceedings of SPIE (February 01 1994)
High-power COIL and YAG laser welding
Proceedings of SPIE (May 06 2002)
High-power COIL and Nd:YAG laser welding
Proceedings of SPIE (November 10 2003)

Back to Top