Presentation + Paper
30 March 2017 Exposure source error and model source error impact on optical proximity correction
Author Affiliations +
Abstract
Previous studies have quantified the impact of source error on wafer CDs in the presence of OPC. The studies found that when a 100% emitting source error is introduced into the OPC model, the corrected mask is minimally impacted through process when small errors are introduced on the source. However, as slightly larger errors are placed on the source used in the OPC mode, catastrophic failures are found. When the same errors are introduced to the exposure source when the mask is corrected with a perfect source, there is a significant through process CD variation in the system but there are no clearly catastrophic failures.

The present study continues beyond the initial work to better understand the interaction between source errors and OPC. In this case, partial transmission and zero transmission errors are introduced into the study. The initial study found a CD bias and extra CD variation when the error was located in the transmissive area for the source error case. As the result of a previous study, these effects are thought to be due to scattered background illumination and pattern shift, respectively. These effects were not as readily observed in the mask error case. This study looks at the interaction of different errors in the source during both exposure and OPC generation to better understand the effects of source errors on the final pattern.

A resulting analysis of study is presented. The analysis explains whether scattered background illumination and pattern shift are the mechanisms of the source effects. This can be concluded if the same effects can be generated in the mask error case using various source errors. The software methodology used to execute these studies is presented in detail.
Conference Presentation
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lawrence S. Melvin III, Artak Isoyan, and Chander Sawh "Exposure source error and model source error impact on optical proximity correction", Proc. SPIE 10147, Optical Microlithography XXX, 101470X (30 March 2017); https://doi.org/10.1117/12.2258055
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical proximity correction

Photomasks

Data modeling

Reticles

Critical dimension metrology

Resolution enhancement technologies

Semiconducting wafers

RELATED CONTENT


Back to Top