Paper
27 March 2017 Optimize of shrink process with X-Y CD bias on hole pattern
Author Affiliations +
Abstract
Gridded design rules[1] is major process in configuring logic circuit used 193-immersion lithography. In the scaling of grid patterning, we can make 10nm order line and space pattern by using multiple patterning techniques such as self-aligned multiple patterning (SAMP) and litho-etch- litho-etch (LELE)[2][3][4] . On the other hand, Line cut process has some error parameters such as pattern defect, placement error, roughness and X-Y CD bias with the decreasing scale. We tried to cure hole pattern roughness to use additional process such as Line smoothing[5] . Each smoothing process showed different effect. As the result, CDx shrink amount is smaller than CDy without one additional process. In this paper, we will report the pattern controllability comparison of EUV and 193-immersion. And we will discuss optimum method about CD bias on hole pattern.
© (2017) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kyohei Koike, Arisa Hara, Sakurako Natori, Shohei Yamauchi, Masatoshi Yamato, Kenichi Oyama, and Hidetami Yaegashi "Optimize of shrink process with X-Y CD bias on hole pattern", Proc. SPIE 10146, Advances in Patterning Materials and Processes XXXIV, 101461N (27 March 2017); https://doi.org/10.1117/12.2258221
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Extreme ultraviolet

Critical dimension metrology

Optical lithography

Etching

Lithography

Inspection

193nm lithography

Back to Top