Radially-polarised beam amplification in an Yb:YAG thin-slab architecture (Conference Presentation)

Callum R. Smith; Stephen J. Beecher; Jacob I. Mackenzie; W. Andrew Clarkson

doi:10.1117/12.2256298

21 April 2017 Radially-polarised beam amplification in an Yb:YAG thin-slab architecture (Conference Presentation)

Callum R. Smith, Stephen J. Beecher, Jacob I. Mackenzie, W. Andrew Clarkson

Proceedings Volume 10082, Solid State Lasers XXVI: Technology and Devices; 1008204 (2017) https://doi.org/10.1117/12.2256298
Event: SPIE LASE, 2017, San Francisco, California, United States

Abstract

Radially-polarised beams are attracting growing interest owing to their unique properties and numerous applications. Power-scaling whilst preserving the polarisation-purity of radially-polarised beams is challenging, with efforts predominantly focused on cylindrically-symmetric systems. We explore an alternative strategy for power-scaling radially-polarised beams using a thin-slab amplifier geometry, which, to the best of our knowledge, has not been previously investigated. We show that very high radial polarisation-purity can be maintained in an architecture that can be operated at high powers. A radially-polarised seed-source was constructed using an Yb:YAG rod in a plane-parallel configuration, pumped by a capillary delivery-fiber which provided effective overlap with the LG01 mode. By tuning the cavity length and utilising thermally-induced birefringence, a robust multi-Watt LG01 mode was generated with an excellent radial polarisation-purity of 15dB and good beam quality M2=2.2. The Yb:YAG slab was pumped by a diode-bar producing a highly-elongated inversion region. The seed was amplified in a double-pass configuration, using a cylindrical lens to spatially-match the inversion. The output beam was re-collimated by the cylindrical lens, and compensation for the Gouy phase-shift was made using a half-waveplate. At 50W of incident pump power we obtained a small-signal gain of 7.5dB and a power gain of 4.5dB for 1.45W seed power. At maximum pump power the radial polarisation-purity was maintained at 15dB, and the beam quality only degraded slightly to M2=2.3. Further optimisation of slab design and pump geometry will be discussed in addition to power-scaling the system to higher output powers necessary for a range of applications.

Conference Presentation

Citation Download Citation

Callum R. Smith, Stephen J. Beecher, Jacob I. Mackenzie, and W. Andrew Clarkson "Radially-polarised beam amplification in an Yb:YAG thin-slab architecture (Conference Presentation)", Proc. SPIE 10082, Solid State Lasers XXVI: Technology and Devices, 1008204 (21 April 2017); https://doi.org/10.1117/12.2256298

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
PRESENTATION

WATCH
PRESENTATION SAVE TO MY LIBRARY

GET CITATION

KEYWORDS

Amplifiers

Birefringence

Capillaries

Current controlled current source

Laser applications

Optoelectronics

Solid state lasers

Keywords/Phrases

Search In:

Publication Years