Paper
24 November 2016 Evaluation of 3D displacement components by combining DSCM with ESPI
Ping Sun, Kai Shi, Mingyong Sun, Haibin Sun
Author Affiliations +
Abstract
A method for three-dimensional (3-D) deformation measurement is presented by combining Digital Speckle Correlation Method (DSCM) with Electronic Speckle Pattern Interferometry (ESPI). The combination is completed based on a typical ESPI system, in which the reference light is controlled to turn on or shut down. The in-plane displacement components are obtained by using DSCM when the reference light is shut. A phase shifting ESPI is formed when the reference light is used, which can be used for the measurement of the out-plane displacement component. A typical three-point-bending experiment is completed. Experiment results show that the three displacement components can be obtained by the combination effectively.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ping Sun, Kai Shi, Mingyong Sun, and Haibin Sun "Evaluation of 3D displacement components by combining DSCM with ESPI", Proc. SPIE 10023, Optical Metrology and Inspection for Industrial Applications IV, 100231V (24 November 2016); https://doi.org/10.1117/12.2246288
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Speckle pattern

3D metrology

3D image processing

Speckle

Interferometry

Phase shifts

CCD cameras

Back to Top