Paper
12 October 1988 Laboratory Calibration Of Field Reflectance Panels
S F Biggar, J Labed, R P Santer, P. N Slater, R D Jackson, M S Moran
Author Affiliations +
Abstract
A method used for calibrating field reflectance panels in the visible and shortwave infrared wavelength range is described. The directional reflectance factor of painted barium sulfate (BaSO4) panels is determined. The reference for this method is the hemispherical reflectance of pressed polytetrafluoroethylene (halon) powder prepared according to National Bureau of Standards (NBS) directions. The panels and a radiometer are mounted on rotation stages to measure the reflectance factor at different incidence and view angles. The sensor can be any laboratory or field filter radiometer small enough to mount on the apparatus. The method is used to measure the reflectance factors of halon and BaSO4 panels between 0.45 and 0.85 micrometers. These reflectance factors are compared to those measured by a field apparatus. The results agree to within 0.013 in reflectance at incidence angles between 15 and 75 degrees.
© (1988) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S F Biggar, J Labed, R P Santer, P. N Slater, R D Jackson, and M S Moran "Laboratory Calibration Of Field Reflectance Panels", Proc. SPIE 0924, Recent Advances in Sensors, Radiometry, and Data Processing for Remote Sensing, (12 October 1988); https://doi.org/10.1117/12.945691
Lens.org Logo
CITATIONS
Cited by 50 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reflectivity

Radiometry

Calibration

Sensors

Lamps

Data processing

Remote sensing

Back to Top