Metrology With An Atomic Force Microscope

P. C.D. Hobbs; H. K. Wickramasinghe

doi:10.1117/12.968362

1 January 1988 Metrology With An Atomic Force Microscope

P. C.D. Hobbs, H. K. Wickramasinghe

Proceedings Volume 0921, Integrated Circuit Metrology, Inspection, and Process Control II; (1988) https://doi.org/10.1117/12.968362
Event: Santa Clara Symposium on Microlithography, 1988, Santa Clara, CA, United States

Abstract

We describe applications of the atomic, magnetic, and electrostatic force microscopes (AFM, MFM and EFM), to metrology problems, especially profiling, magnetic field measurements and potentiometry. The force microscope has many advantages. It is capable of much higher lateral resolution than optics or low-voltage SEM, is nondestructive, operates in air, and does not require samples with special properties, such as electrical conductivity or extreme smoothness. By changing the tip-sample spacing, the speed/resolution tradeoff can be optimized for each application. The basic force probe consists of an L-shaped wire cantilever mounted on a piezoelectric bimorph which serves for terrain following and excitation. The wire is electro-etched to reduce its diameter and form a sharp tip. When the tip and sample are close together, the gradient of the force between them changes the effective spring constant (and thus the resonant frequency of the cantilever; the shift is detected as a changed response to a slightly off-resonance excitation. Force gradients of 10-4 N/m and force increments of 10-13N have been measured in this way, and the current lateral re-solution is 50Å; there seems to be no fundamental impediment to achieving atomic resolution. The electrostatic force microscope is an AFM with a voltage applied to the tip. It makes possible potentiometry through nonconducting passivation layers. The magnetic force microscope (MFM) is very similar. It uses a steel wire tip to make magnetic images with a lateral resolution of better than 1000 A. which we hope to improve to 100 A. We present data illustrating usefulness of all these techniques in metrology problems.

Citation Download Citation

P. C.D. Hobbs and H. K. Wickramasinghe "Metrology With An Atomic Force Microscope", Proc. SPIE 0921, Integrated Circuit Metrology, Inspection, and Process Control II, (1 January 1988); https://doi.org/10.1117/12.968362

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
6 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Magnetism

Microscopes

Metrology

Atomic force microscopy

Profiling

Interferometers

Multiphoton fluorescence microscopy

Show All Keywords

Keywords/Phrases

Search In:

Publication Years