Paper
22 August 1985 An Absolute Displacement Sensor Using Moire Fringe Techniques With Multimode Optical Fibres
Barry E. Jones, Graeme S. Philp
Author Affiliations +
Proceedings Volume 0522, Fibre Optics '85; (1985) https://doi.org/10.1117/12.946241
Event: Sira/Fibre Optics '85, 1985, London, United Kingdom
Abstract
The feasibility of the use of optical fibres to supply light to, and relay information from, an absolute moire fringe displacement sensor has been demonstrated and a prototype built. Fringe interpolation techniques are employed which reduce the susceptibility of the sensor to adventitious intensity fluctuations. The system is designed to operate over a displacement range of 100 μm and can resolve displacements down to 12 nm: nonlinearity is ±0.8 μm, while hysteresis and repeatability are better than 0.3 μm. The system is largely immune to intensity variations on the input light channel, however differential attenuation between any of the four return light channels more seriously affects the measurement. In order to try and avoid this problem an optical arrangement has been investigated in which intensity information corresponding to four quadrature points on the moire-fringe profile is carried in a single return optical fibre using wavelength separation.
© (1985) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Barry E. Jones and Graeme S. Philp "An Absolute Displacement Sensor Using Moire Fringe Techniques With Multimode Optical Fibres", Proc. SPIE 0522, Fibre Optics '85, (22 August 1985); https://doi.org/10.1117/12.946241
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Moire patterns

Optical fibers

Signal detection

Diffraction gratings

Signal attenuation

Head

Back to Top