Paper
27 July 1979 The Transient Bending State Of A Transversely Struck Plate Determined By Isodensitometry
H. Schwieger, V. Truppat
Author Affiliations +
Proceedings Volume 0189, 13th Intl Congress on High Speed Photography and Photonics; (1979) https://doi.org/10.1117/12.957576
Event: 13th International Congress on High Speed Photography and Photonics, 1978, Tokyo, Japan
Abstract
The propagation of bending waves is visualized by the birefringent coating method. The plate to be investigated is coated by a photoelastic foil, and the dynamical photoelastic effect is studied by a reflexion-polariscope and a controlled single flash. The so called "Isodensito-metry" is applied in order to determine quantitatively the local distribution of the maximum torsional moment. The isodenses as lines of equal density are produced on the photographic film by applying the "Sabattier-Effect". In a special way the isodenses are calibrated and to-gether with other photoelastic data one is able to evalu-ate the maximum torsional moment. For getting a better in-sight into the impact problem and for verification of the optical results additional measurements of the impact forces and the strains were performed.
© (1979) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. Schwieger and V. Truppat "The Transient Bending State Of A Transversely Struck Plate Determined By Isodensitometry", Proc. SPIE 0189, 13th Intl Congress on High Speed Photography and Photonics, (27 July 1979); https://doi.org/10.1117/12.957576
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photoelasticity

Photography

Coating

Calibration

Polarizers

Visualization

Wave plates

Back to Top