Characterization of operating parameters of an in vivo micro CT system

Muhammad U. Ghani; Liqiang Ren; Kai Yang; Wei R. Chen; Xizeng Wu; Hong Liu

doi:10.1117/12.2209626

9 March 2016 Characterization of operating parameters of an in vivo micro CT system

Muhammad U. Ghani, Liqiang Ren, Kai Yang, Wei R. Chen, Xizeng Wu, Hong Liu

Proceedings Volume 9709, Biophotonics and Immune Responses XI; 97090M (2016) https://doi.org/10.1117/12.2209626
Event: SPIE BiOS, 2016, San Francisco, California, United States

Abstract

The objective of this study was to characterize the operating parameters of an in-vivo micro CT system. In-plane spatial resolution, noise, geometric accuracy, CT number uniformity and linearity, and phase effects were evaluated using various phantoms. The system employs a flat panel detector with a 127 μm pixel pitch, and a micro focus x-ray tube with a focal spot size ranging from 5-30 μm. The system accommodates three magnification sets of 1.72, 2.54 and 5.10. The in-plane cutoff frequencies (10% MTF) ranged from 2.31 lp/mm (60 mm FOV, M=1.72, 2×2 binning) to 13 lp/mm (10 mm FOV, M=5.10, 1×1 binning). The results were qualitatively validated by a resolution bar pattern phantom and the smallest visible lines were in 30-40 μm range. Noise power spectrum (NPS) curves revealed that the noise peaks exponentially increased as the geometric magnification (M) increased. True in-plane pixel spacing and slice thickness were within 2% of the system’s specifications. The CT numbers in cone beam modality are greatly affected by scattering and thus they do not remain the same in the three magnifications. A high linear relationship (R² > 0.999) was found between the measured CT numbers and Hydroxyapatite (HA) loadings of the rods of a water filled mouse phantom. Projection images of a laser cut acrylic edge acquired at a small focal spot size of 5 μm with 1.5 fps revealed that noticeable phase effects occur at M=5.10 in the form of overshooting at the boundary of air and acrylic. In order to make the CT numbers consistent across all the scan settings, scatter correction methods may be a valuable improvement for this system.

Conference Presentation

Citation Download Citation

Muhammad U. Ghani, Liqiang Ren, Kai Yang, Wei R. Chen, Xizeng Wu, and Hong Liu "Characterization of operating parameters of an in vivo micro CT system", Proc. SPIE 9709, Biophotonics and Immune Responses XI, 97090M (9 March 2016); https://doi.org/10.1117/12.2209626

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available