Paper
27 November 2007 Lock-in thermography for evaluation of destruction area and determination of depth
Zijun Wang, Junyan Liu, Jingmin Dai
Author Affiliations +
Proceedings Volume 6723, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment; 67231F (2007) https://doi.org/10.1117/12.783180
Event: 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 2007, Chengdu, China
Abstract
Infrared Thermography is a Nondestructive Testing and Evaluating (NDT&E) technique that allows the non-contact inspection of systems and materials through a mapping of thermal patterns on the surface of the objects of interest. Defect detection principle in active thermography is based on the fact that a difference of thermal properties exists between the sound area and a defective region, which can be used for defect detection and quantification purposes. In this paper, experimental studies were made on the applicability to the detection of artificial defects in a steel flat plate with 12 flat-bottomed holes with three different sizes located at three different depths. The object was periodically heated by quartz lamps combined with light controller. The controller was operated by the same reference signal for the lock-in thermography. It was found that the defects were detected by localized contrast change in the phase delay images. It was also found that the location and size of defects can be estimated by the area of contrast change in the phase delay images which was clearly observed compared with conventional thermography techniques. The relationship between the values of phase delay and heating periods or modulation frequency was examined for several defect depths.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zijun Wang, Junyan Liu, and Jingmin Dai "Lock-in thermography for evaluation of destruction area and determination of depth", Proc. SPIE 6723, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 67231F (27 November 2007); https://doi.org/10.1117/12.783180
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Thermography

Modulation

Phase shift keying

Phase contrast

Defect detection

Inspection

Diffusion

Back to Top