Paper
1 April 1990 Triangulation-Based Camera Calibration For Machine Vision Systems
R. A. Bachnak, M. Celenk
Author Affiliations +
Proceedings Volume 1194, Optics, Illumination, and Image Sensing for Machine Vision IV; (1990) https://doi.org/10.1117/12.969851
Event: 1989 Symposium on Visual Communications, Image Processing, and Intelligent Robotics Systems, 1989, Philadelphia, PA, United States
Abstract
This paper describes a camera calibration procedure for stereo-based machine vision systems. The method is based on geometric triangulation using only a single image of three distinctive points. Both the intrinsic and extrinsic parameters of the system are determined. The procedure is performed only once at the initial set-up using a simple camera model. The effective focal length is extended in such a way that a linear transformation exists between the camera image plane and the output digital image. Only three world points are needed to find the extended focal length and the transformation matrix elements that relates the camera position and orientation to a real world coordinate system. The parameters of the system are computed by solving a set of linear equations. Experimental results show that the method, when used in a stereo system developed in this research, produces reasonably accurate 3-D measurements.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. A. Bachnak and M. Celenk "Triangulation-Based Camera Calibration For Machine Vision Systems", Proc. SPIE 1194, Optics, Illumination, and Image Sensing for Machine Vision IV, (1 April 1990); https://doi.org/10.1117/12.969851
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cameras

Image processing

Machine vision

Calibration

Imaging systems

Digital imaging

3D image processing

Back to Top