15 January 2013 Field programmable gate arrays-based number plate binarization and adjustment for automatic number plate recognition systems
Xiaojun Zhai, Faycal Bensaali, Reza Sotudeh
Author Affiliations +
Abstract
Number plate (NP) binarization and adjustment are important preprocessing stages in automatic number plate recognition (ANPR) systems and are used to link the number plate localization (NPL) and character segmentation stages. Successfully linking these two stages will improve the performance of the entire ANPR system. We present two optimized low-complexity NP binarization and adjustment algorithms. Efficient area/speed architectures based on the proposed algorithms are also presented and have been successfully implemented and tested using the Mentor Graphics RC240 FPGA development board, which together require only 9% of the available on-chip resources of a Virtex-4 FPGA, run with a maximum frequency of 95.8 MHz and are capable of processing one image in 0.07 to 0.17 ms.
© 2013 SPIE and IS&T 0091-3286/2013/$25.00 © 2013 SPIE and IS&T
Xiaojun Zhai, Faycal Bensaali, and Reza Sotudeh "Field programmable gate arrays-based number plate binarization and adjustment for automatic number plate recognition systems," Journal of Electronic Imaging 22(1), 013009 (15 January 2013). https://doi.org/10.1117/1.JEI.22.1.013009
Published: 15 January 2013
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Graphene

Resistance

Temperature metrology

Carbon

Electrodes

Metals

Semiconducting wafers

RELATED CONTENT

3D micromachined devices based on polyimide joint technology
Proceedings of SPIE (October 01 1999)
Noise in carbon nanotube electronics
Proceedings of SPIE (May 23 2005)
Fabrication and testing of microchannel heat exchangers
Proceedings of SPIE (September 26 1995)

Back to Top