1 July 2004 Semiconductor sidewall shape estimation
Author Affiliations +
Abstract
For process control, linewidth measurements are commonly performed on semiconductor wafers using top-down images from critical dimension measurement scanning electron microscopes (CD-SEMs). However, a measure of the line sidewall shape will be required as linewidths continue to shrink. Sidewall shape can be measured by physically cleaving the device and performing an SEM scan of the cross section, but this process is time consuming and results in destruction of product wafers. We develop a technique to estimate sidewall shape from top-down SEM images using pattern recognition based on historical cross section/top-down image pairs. Features are computed on subimages extracted from the top-down images. Several combinations of principal component analysis (PCA) and flavors of linear discriminant analysis (LDA) are employed to reduce the dimensionality of the feature vectors and maximize the spread between different sidewall shapes. Direct, weighted LDA (DW-LDA) results in a feature set that provides the best sidewall shape estimation. Experimental testing of the sidewall estimation system shows a root mean square error of approximately 1.8% of the linewidth, showing that this system is a viable method for estimating sidewall shape with little impact on the fabrication process (no new hardware and a minimal increase in process setup).
©(2004) Society of Photo-Optical Instrumentation Engineers (SPIE)
Philip R. Bingham, Jeffery R. Price, Kenneth W. Tobin Jr., and Thomas P. Karnowski "Semiconductor sidewall shape estimation," Journal of Electronic Imaging 13(3), (1 July 2004). https://doi.org/10.1117/1.1763586
Published: 1 July 2004
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications and 3 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Feature extraction

Scanning electron microscopy

Image processing

Principal component analysis

Databases

Semiconductors

Error analysis

Back to Top